The Flex15 is a bi-functional high-power loudspeaker and is equipped with a 15″ cone loudspeaker and a 15″ high frequency driver. The 75° x 50° radiating horn is rotatable to achieve 50° x 75° directivity.
A complex passive crossover matches the components perfectly and allows for full-range application without additional electronics. The Flex15 is a universal tool which can be used as a FoH speaker, as a wedge, and as a mid-high unit in combination with our Flex-Series Subs. For easy and efficient cable connection as a wedge or near-fill, 4 Speakon NL4 are available. There are two connectors on the rear and two on the bottom.
Application
• Front of house system
• Use at compact Wedge
• Frontfill / Nearfill
• Rotatable CD horn
• Bi-functional enclosure design
Specifications
• 15″ Neodymium low-mid speaker
• 1.0″ Neodymium compression driver with 1.7″ voice coil
• Power handling: 400 Watts RMS | 1,600 Watts Peak
Технические характеристики:
- Enclosure: 15 mm birch plywood with structure paint and monitor angles
- Basic layout: 2-way passive system, bass-reflex tuning
- Protective Grille: 1.5 mm grille, covered with acoustic foam
- Components: 15“ neodymium low-mid speaker 1“ neodymium compression driver with 1.7“ voice coil rotatable CD-Horn passive crossover with phase correction
- Frequency Response: 70 Hz–19,5 kHz
- Power handling RMS | peak: 400 W RMS | 1,600 W Peak
- Nominal Impedance: 8 Ω
- Dispersion pattern: 75° x 50°
- Sensitivity: 98 dB
- SPLmax: 130 dB | peak | 1 m
- Connectors: NL4: 1+/1- , 4 times, 2 on the rear, 2 on the bottom
- Dimensions (w x h x d): 450 x 700 x 390 mm
- net weight: 22 kg
- Accessories: U-bracket, double flight case, transport cover