FUTURELIGHT PLB-280 Moving Head Spot/Beam
- Производитель: FUTURELIGHT
- Код Товара: 22254-
-
229.341 ₽
(2.200.31€)
FUTURELIGHT PLB-280 Moving Head Spot/Beam
- Equipped with an Osram Sirius HRI 280 W discharge lamp
- Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
- Supports RDM (Remote Device Management)
- High PAN/TILT speed
- 14, 16, 20 or 23 DMX channels selectable
- Spot, beam and due to the use of the frost filter also wash light in one device
- Color wheel with 13 different dichroic color filters plus white
- Rainbow effect with adjustable speed in both directions
- Effect wheel with rotating 6-facet linear prism, 8-facet prism and frost filter
- The prism rotate in both directions and at different speeds
- Gobo wheel 1 with 9 rotating gobos plus open
- All rotating gobos can be interchanged
- Slot-in gobo system for exchanging gobos without tools
- Gobo wheel 2 with 14 static gobos plus open
- With gobo shake function
- Strobe effect with adjustable speed
- Random strobe effect
- Motorized focus
- Autofocus
- Motorized zoom with 2 - 10° beam angle (Beam mode) and 5.5 - 23° beam angle (Spot mode)
- Dimmer
- PAN angle switchable between 540° and 630°
- Exact positioning via 16 bit PAN/TILT movement resolution
- Automatic position correction,
- Switch-mode power supply, automatic power supply adaption between 100 and 240 Volts without power selector
- ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
- Control board with graphic LCD for adjusting the DMX-starting address, PAN/TILT reverse, reset, lamp on/off, operating hours
- DMX-controlled operation or stand-alone operation with master/slave function
- Number of scenes in Program Run can be changed individually
- The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory
- Software upload by optional accessory via DMX link
- With Osram Sirius HRI 280 W lamp
- Power connection via Neutrik PowerCon jack and included power cable
- DMX-control via any standard DMX-controller
- Control: RDM
- Control: DMX
- Control: Stand-alone
- Control: W-DMX
- Color generation: Colour wheel
- Color generation: CW
Технические характеристики
| Power supply: | 100-240 V AC, 50/60 Hz |
| Power consumption: | 360 W |
| DMX channels: | 14/16/20/23 |
| DMX connection: | 5-pin and 3-pin XLR |
| Flash-rate: | 20 Hz |
| Beam angle: | 2-10° (Beam mode), 5.5-23° (Spot mode) |
| Color-wheel: | 13 dichroic filters plus open |
| Rotating gobo-wheel: | 9 gobos and open |
| Outside diameter of the gobos: | 16 mm |
| Image diameter of the gobos: | 12 mm |
| Static gobo wheel: | 14 gobos and open |
| Maximum PAN-movement: | 630° |
| Maximum TILT-movement: | 270° |
| Dimensions (L x W x H): | 402 x 369 x 534 mm |
| Lamp type: | Discharge lamp |
| Weight: | 19 kg |
| Cooling fan: | yes, temperature controlled |
| IP classification: | IP20 |
| Power consumption: | 360 W |
| Laser class: | Without laser |
| Beam angle: | 2 - 23 ° |
| Pan tilt feedback: | Pan tilt feedback |
| Height: | 53,4 cm |
| Depths: | 36,9 cm |
| Width: | 40,2 cm |
| Ecodesign regulation: | Yes |
| Special product: | Not designed for household room illumination |
| Purpose: | Show effect lighting |
| Lamp: | 1 x conventional with EEI C included. |